How to String Your Guitar Like a Pro :- Newbie Guide

If you are learning guitar or already an expert, you will eventually end up in a situation where you have to change the string of your guitar.

Though changing the guitar strings might seem like a complicated process, it is pretty simple if you follow the correct procedure.

Changing the strings of an acoustic or electric guitar looks difficult for a beginner. If you do not follow the effective method, then you might end up breaking the string or interfere with the tune of the string.

More...

Some players never learn to change the strings as they think that it is a challenging task, while some players are too lazy to notice that they need to change their strings.

As a guitar player, it is very important to know how to change the strings of your guitar and maintain the skills.

If you never want to be in a situation where you've mid-stop your music due to the string being broke, you should know when to change and how to change the strings of your guitar.

  • Set of Pliers
  • String Winder
  • Guitar Tuner
  • New replacement strings

​Once you have all the necessary things to change the strings, move on to the next steps.

We have mentioned the steps clearly so that you will not face any issues when trying to change the strings.

1. Remove the old strings:

When you are trying to change the strings, it is not recommended to remove all the strings at once because this will change the tension, and it can upset the balance of your guitar's neck.

You might also get confused when you remove all the strings at once, as you'll not be able to figure out which string you should wind.

It is better to remove one string at a time so that you will not damage your guitar.

Though it does not matter in what order you are going to change the strings, it is still a better practice to start changing the string from the 6th string.

As the first string is hard to change, it is more likely to unwind as you try to wind it up.

2. Loose your old string:

​When you remove a tight string, it will cut your finger or spring off the guitar. So it would help if you made sure that the string is loose before you try to remove it from the guitar.

All you have to do is to lose the string by turning the tuning peg. Make sure that the string is no longer playing a note.

If the string is not playing any sound, then it means that it ready to come off.

3. Unwind the string from the tuning peg:

Now, you can feel that the string is straight and loose. Since the tension has been removed from the string, you can remove the string easily.

If you observe that the string has a kink or it is taking any coercion, then bend it back a little to straighten out the kink. Just pull the string lightly to free it from the tuning peg.

The ends of guitar strings are very sharp, just like how a pin or needle would be. Handle them with care and make sure you are not getting hurt during this process.

As strings are also made up of metal, you need to be careful.

4. Remove the string from the bridge end:

As you have freed the string at the headstock end of the guitar, now, you need to loose the other end at the bridge of the guitar. Changing the other string end of the guitar may vary depending on the type of guitar you are using.

For suppose, if you are using best acoustic guitar, the string end will have the bridge pin, which can be removed by using either pliers or string notch. If you don't have these things handy, then you can use a spoon to remove the bridge pin.

Once you have freed the bridge pin, you can lift the string out of the bridge easily.

If you have a nylon-string guitar, then you will not find any bridge pins on the guitar. The strings are tied to the guitar by a loop that has been threaded itself. It would help if you untied the loop to remove the strings from the guitar.

If you are using an electric guitar, you can remove the strings from the bridge end of the guitar in two ways.

One is String-through, and the other is Bridge-mounted. If you want to change the guitar strings using the String-through method, then you will find that the strings are held in through the holes in the back of the guitar body, and they jab out through the bridge end at the front.

If you want to change the guitar strings using the Bridge-mounted method, then it means that the strings feed in straight along the bridge at the front end.

Once you have made sure that the string is loose and slack, you can slide its way through the bridge.

How often should you change the strings?

To make sure your guitar is in better condition, you need to check how your strings are performing.

If one of your guitar strings has broken, then it means that the other strings have also past their best time, and you should check if they are producing the same sound as the new ones.

If you don't want to hear the dull-sounding strings, then you need to change your strings.

You might not be able to purchase individual strings as they are only available in a pack.

If you are going to play lots of shows, then you need to change the strings of your guitar frequently.

Wrapping Up:

Now that you get to know how to change your guitar strings, you can get a new string pack and replace your strings.

Once you change the strings, try to play it most of the time so that the strings will get stabilized and will produce a perfect tune.

Share Now
  • Chase
  • Updated 7 months ago
Click Here to Leave a Comment Below 0 comments